Sonnet Encore/ST Duet *DUAL* G4/1.8GHz ne marche pas sur mon G4 gigabit 2 x 450http://forums.macg.co/images/smilies/confused.gif. J'ai intervertis plusieurs fois mes puces d'origine et les nouvelles en modifiant ma configuration dont l'une d'elle était la plus dépouillée; une seul barette mémoire, souris, clavier, écran sans remettre mon lecteur cd et la carte graphique d'origines ne l'ai ayant plus.
Voici un des messages que j'ai pu recupérer aprés le Kernel panic:
panic(cpu 1 caller 0x00103340): /SourceCache/xnu/xnu-792.24.17/bsd/vfs/vfs_journal.c:2074: jhdr magic corrupted (0x4a4e4c78 != 0x4a4e4c78)
Latest stack backtrace for cpu 1:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x00103340 0x00249468 0x00249D58 0x002491AC 0x00247504
0x002475CC 0x00247680 0x002483FC 0x0022CB44 0x0022CD60 0x00239A34 0x000FC184 0x000FB544
0x000E9690 0x000ED624 0x000ED898 0x002ABDB8 0x000ABD30 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x39A9B280)
PC=0x90001F2C; MSR=0x0000D030; DAR=0x2C690000; DSISR=0x42000000; LR=0x000097CC; R1=0xF00FECE0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
Model: PowerMac3,3, BootROM 4.2.8f1, 2 processors, PowerPC G4 (2.9), 450 MHz, 2 GB
Graphics: ATI Radeon 9000 Pro, ATY,RV250, AGP, 64 MB
Memory Module: DIMM0/J21, 512 MB, SDRAM, PC100-322S
Memory Module: DIMM1/J22, 512 MB, SDRAM, PC133-333
Memory Module: DIMM2/J23, 512 MB, SDRAM, PC100-222S
Memory Module: DIMM3/J24, 512 MB, SDRAM, PC100-222S
Modem: Spring, Euro, V.90, 3.0F, APPLE VERSION 0005, 11/11/1999
Bluetooth: Version 1.9.5f4, 2 service, 1 devices, 2 incoming serial ports
Network Service: Ethernet intégré, Ethernet, en0
PCI Card: usb, usb, SLOT-C
PCI Card: usb, usb, SLOT-C
PCI Card: pci1799,2, SLOT-C
PCI Card: ACARD,6280M, scsi, SLOT-D
Parallel ATA Device: LITE-ON DVDRW SHW-1635S
Parallel ATA Device: IOMEGA ZIP 100 ATAPI
SCSI Device: SCSI Target Device @ 0
SCSI Device: SCSI Target Device @ 1
SCSI Device: SCSI Target Device @ 3
USB Device: Hub, Up to 12 Mb/sec, 500 mA
USB Device: Perfection1240, EPSON, Up to 12 Mb/sec, 500 mA
USB Device: USB Receiver, Logitech, Up to 1.5 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
USB Device: USB Device, Up to 12 Mb/sec, 500 mA
USB Device: Generic USB Hub, ALCOR, Up to 12 Mb/sec, 500 mA
USB Device: Bluetooth USB Host Controller, Up to 12 Mb/sec, 500 mA
USB Device: Acecad USB Tablet, Up to 1.5 Mb/sec, 500 mA
FireWire Device: unknown_device, unknown_value, Up to 400 Mb/sec
mon finder a bien monter et j'ai pu constater que j'avais bien deux nouvelles puces 2x1,8Ghz Powerpc G4 mais a chaque fois le gros bug au bout d'une minute.
Je demande humblement a un grand maître yoda http://forums.macg.co/images/smilies/zen.gifde me dire la vérité sur mon problème.
Partout on m'indiquer que cette carte est compatible avec ma machine > OWG > Sonnet.
Voici un des messages que j'ai pu recupérer aprés le Kernel panic:
panic(cpu 1 caller 0x00103340): /SourceCache/xnu/xnu-792.24.17/bsd/vfs/vfs_journal.c:2074: jhdr magic corrupted (0x4a4e4c78 != 0x4a4e4c78)
Latest stack backtrace for cpu 1:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x00103340 0x00249468 0x00249D58 0x002491AC 0x00247504
0x002475CC 0x00247680 0x002483FC 0x0022CB44 0x0022CD60 0x00239A34 0x000FC184 0x000FB544
0x000E9690 0x000ED624 0x000ED898 0x002ABDB8 0x000ABD30 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x39A9B280)
PC=0x90001F2C; MSR=0x0000D030; DAR=0x2C690000; DSISR=0x42000000; LR=0x000097CC; R1=0xF00FECE0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
Model: PowerMac3,3, BootROM 4.2.8f1, 2 processors, PowerPC G4 (2.9), 450 MHz, 2 GB
Graphics: ATI Radeon 9000 Pro, ATY,RV250, AGP, 64 MB
Memory Module: DIMM0/J21, 512 MB, SDRAM, PC100-322S
Memory Module: DIMM1/J22, 512 MB, SDRAM, PC133-333
Memory Module: DIMM2/J23, 512 MB, SDRAM, PC100-222S
Memory Module: DIMM3/J24, 512 MB, SDRAM, PC100-222S
Modem: Spring, Euro, V.90, 3.0F, APPLE VERSION 0005, 11/11/1999
Bluetooth: Version 1.9.5f4, 2 service, 1 devices, 2 incoming serial ports
Network Service: Ethernet intégré, Ethernet, en0
PCI Card: usb, usb, SLOT-C
PCI Card: usb, usb, SLOT-C
PCI Card: pci1799,2, SLOT-C
PCI Card: ACARD,6280M, scsi, SLOT-D
Parallel ATA Device: LITE-ON DVDRW SHW-1635S
Parallel ATA Device: IOMEGA ZIP 100 ATAPI
SCSI Device: SCSI Target Device @ 0
SCSI Device: SCSI Target Device @ 1
SCSI Device: SCSI Target Device @ 3
USB Device: Hub, Up to 12 Mb/sec, 500 mA
USB Device: Perfection1240, EPSON, Up to 12 Mb/sec, 500 mA
USB Device: USB Receiver, Logitech, Up to 1.5 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
USB Device: USB Device, Up to 12 Mb/sec, 500 mA
USB Device: Generic USB Hub, ALCOR, Up to 12 Mb/sec, 500 mA
USB Device: Bluetooth USB Host Controller, Up to 12 Mb/sec, 500 mA
USB Device: Acecad USB Tablet, Up to 1.5 Mb/sec, 500 mA
FireWire Device: unknown_device, unknown_value, Up to 400 Mb/sec
mon finder a bien monter et j'ai pu constater que j'avais bien deux nouvelles puces 2x1,8Ghz Powerpc G4 mais a chaque fois le gros bug au bout d'une minute.
Je demande humblement a un grand maître yoda http://forums.macg.co/images/smilies/zen.gifde me dire la vérité sur mon problème.
Partout on m'indiquer que cette carte est compatible avec ma machine > OWG > Sonnet.
