Bon là, il se pourrait que cela se précise si l'on croit en ce que rapporte MacWhispers:
</font><blockquote><font class="small">En réponse à:</font><hr />
What we have been told by a technical source inside the company injecting the enclosure is:
- It is 132mm high, 188mm wide, and 24.6mm thick.
- The front face is completely open, other than a 7.5mm bezel.
- The top edge has an 18mm x 106mm recessed well (no door). The recessed surface is 7mm deep, and is being molded with 4 through-holes for PCB-mounted connectors.
- The underside has two compartment openings; one is 66mm x 106mm; no cover is being injected at the same plant. The other is 24mm x 66mm with a "flip open" door; this door is being injected at the same plant. The recess behind the flip-open door is being molded with just two, "small, rectangular" openings, not recognized as any standard connector size.
- The right edge of the enclosure has a round and a rectangular through-hole, described only as "small."
- Stand-off and other interior details of the enclosure indicate that it uses one motherboard, an LCD module, and has a snap-in, removable battery on its back face.
- The enclosure has just now gone into actual production in "large quantities."
[/QUOTE]
Ici une image de la taille:
Quelqu'un pourrait-il en faire une version en 3D (surtout pour voir l'épaisseur)?
</font><blockquote><font class="small">En réponse à:</font><hr />
What we have been told by a technical source inside the company injecting the enclosure is:
- It is 132mm high, 188mm wide, and 24.6mm thick.
- The front face is completely open, other than a 7.5mm bezel.
- The top edge has an 18mm x 106mm recessed well (no door). The recessed surface is 7mm deep, and is being molded with 4 through-holes for PCB-mounted connectors.
- The underside has two compartment openings; one is 66mm x 106mm; no cover is being injected at the same plant. The other is 24mm x 66mm with a "flip open" door; this door is being injected at the same plant. The recess behind the flip-open door is being molded with just two, "small, rectangular" openings, not recognized as any standard connector size.
- The right edge of the enclosure has a round and a rectangular through-hole, described only as "small."
- Stand-off and other interior details of the enclosure indicate that it uses one motherboard, an LCD module, and has a snap-in, removable battery on its back face.
- The enclosure has just now gone into actual production in "large quantities."
[/QUOTE]
Ici une image de la taille:
Quelqu'un pourrait-il en faire une version en 3D (surtout pour voir l'épaisseur)?